Ryan Beers


CALL 250 319 0838 FOR A QUOTE

Mobile Cranes and Other Services

At CEC, our growing fleet consists of cranes from 5 ton to 110 ton with access to 250 ton and 500 ton mobile cranes. Some of our smaller cranes, 5 ton hydraulic crawler and 9 ton Carry Deck are excellent for executing jobs in limited spaces with low head room such as substations or inside a mine. Our 35 ton Manitex Boom Truck and 110 ton Liebherr are perfect for rough terrain and tight spaces with their all wheel drive allowing them to make tight turns and get into tough locations.

CEC has specialty rigging to meet the needs of even the most difficult lift. With various slings and spreader bars, we can assist with the perfect rigging plan. Our team has engineered and designed several different types of hoisting attachments and accessories so our lifting capabilities are never limited or restricted. If hoisting personnel is what you need, we have you covered there, too. Our engineered man baskets, made in house, can be used along with our cranes or can be rented out. If we don’t have the perfect equipment and accessories for your lift, our team of steel fabricators combined with our creative minds will come up with the solution so we never have to say no to a challenge. 

Our cranes, rigging and skilled operators can assist you in all heavy lifting for any of your next projects, including:

  • Bridge Installation
  • Precast Concrete 
  • Prefabricated Trusses
  • Transformers
  • Air Handling Units
  • Structural Steel
  • Sea Cans
  • Silos
  • Heavy Equipment
  • Demolition

Our cranes vary in sizes and our fleet is never finished growing which means we will always have the equipment you need to get your job done. Call CEC for a quote and we’ll be glad to send one of our operators over with the perfect unit for your project’s needs.

Other Services For Your Project…

What projects are you able to take on?
We are proud of the wide diversity of our projects.

With our proactive approach, our construction skills apply to projects across the spectrum however unusual they seem.

What working sectors do you operate in?
CEC has a broad range of sectors and values in which we operate; these cover all the various forms of procurement and construction methods whether new build or refurbishment.

Many of the projects you will see have been delivered under a number of framework and partnership agreements we have established across the region.

Is it possible to use CEC for a smaller construction project?
Of course.

The challenge is not always about size or value, but is the measure of complexity and degree of difficulty, especially in client businesses that are sensitive and sophisticated.

What clients do you deal with?
Our client list, in these sectors, ranges from local enterprises to multi-million dollar companies.

Understanding the client needs and meeting their deadlines is critical in many of these commercially driven businesses where our client focussed approach has been well received

What makes you stand out from the rest?
The commercial projects we have undertaken have produced a real diversity in client needs. We have built commercial projects for both public and private clients including some high profile names across the region.

The quality of the finished project has been paramount throughout and we feel that the use of our fully trained in-house resources has been a major factor in achieving such high standards, keeping us at the top of the pile, leading the way.

Industrial Construction


What bridge services do you provide?
We provide new construction, bridge rehabilitation as well as
What type of jobs do you take on?
The bigger the challenge, the better. Whether it be a small backyard support or a complete bridge launch – including false work and engineering, we’re happy to help. Whatever your project is, we’ve got you covered.
Can you offer emergency repair services?
Yes. We can mobilize in a short period of time with our cranes, operators, jacks and welders. We also own and can install temporary bridges after damage such as floods and washouts. We can also come in to hoist and jack a bridge for necessary repairs.
What types of bridges do you work on?
Various, including steel truss bridges, wooden decks, trestles, pedestrian and utility bridges.
Do you offer any specialist services?
Yes, Jacking and specialty rigging. As well as Pile Driving and Sheet Piles for foundation work and temporary shoring.
What is Piling?
A pile is typically used in soil to provide foundation support for buildings or other structures. Generally piles can be steel pipe, steel H-piles, concrete, wood or steel sheets. These piles can be driven, cast in place or installed as screw piles.
Do you offer different Piling services?
    We do, the services include, but are not limited to;
  • Steel H-Piling
  • Steel Sheet Piles
  • Steel Screw Piles
  • Bridge Foundations
  • Building Foundations
  • Retaining Wall Systems
  • Dock Support
Do you provide temporary shoring?
Yes, for projects such as bridge rehabilitation requiring shoring, cofferdams,  
What types of piling does CEC do?
  • Steel Piles – H-Piles, Pipe Piles, Sheet Piles, Helical Screw Piles
  • Concrete Sheet Piles
  • Wooden Piles
Why choose CEC for Pile Driving?
We are one of the only company in the Kamloops area to offer Pile Driving and Screwpile services, with decades of experience in the Piling industry. 

Pile Driving

Jack and Roll

What is Jack and Roll?
A quick and easy method capable of safely moving  heavy equipment and loads in normally inaccessible locations.
What is it used for?
Transformers, Tanks, Pumps etc…we’ve even moved a crematorium, we are up for a challenge!!
How many tonnes can you handle?
Up to 250.
Where can I employ a Jack and Roll?
Any hard to get location where a crane cannot be used.
Are there any limitations to using Jack and Roll?
One of our most sought after services is Jack & Roll and Specialty Rigging – we are one of a few companies that offer this in the Interior and Lower Mainland. We also are the only company in the Kamloops area to offer pile Driving and Screwpile services.
What types of things do you fabricate?
Railings, Gates, Steel Structures, Skids for Welding Rigs…you name it, we can do it!
What type of jobs do you take on?
The bigger the challenge, the better. Whether it be a small backyard support or a complete bridge launch – including false work and engineering. Whatever your project is, we’ve got you covered.
Can I use CEC fabrication in conjunction with other services?
Yes, not only can we fabricate your projects, we can also install using our extensive  fleet along with our extensive crew.
What materials and products are available?
Primarily steel, although we are not limited to and can work with aluminum and other materials.
Do you offer any specialist services?
Yes, with our mobile rigs we have the capacity to fabricate on site.


Get a Quote For Your Project

Contact Us

1400 Chief Louis Way, PO Box 26035 Valleyview PO, Kamloops, BC, V2C 0A9

250 319 0838